< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=992362823725691&ev=PageView&noscript=1" /> China Solar roofing Factory, Solar roofing Supplier
BIPV solar roofing · 30–105 W per tile · OEM / ODM

BIPV Solar Roof Tiles
The Roof Is the Power Plant

A BIPV tile is not a panel bolted onto a roof — it is the roof. Cells are encapsulated inside a stone-coated steel tile with the same thickness, interlock and flashing as our metal range, so one layer does both jobs: it keeps weather out and sends power down. No racking, no extra penetrations, no second trade to blame.

Output
30–105 W
Per tile · three power classes
Fire
A1 / Class A
Non-combustible tile body
Tested
5400 Pa
Force-15 wind · 25 mm hail
Warranty
30+ years
25-yr linear power guarantee
Get a Quote Installation Guides CE · IEC 61215 · IEC 61730 · TÜV · CTC

Where add-on solar goes wrong

Every bracket is a hole in the roof
An add-on array is anchored through the waterproofing. Each fixing leans on a sealant bead that hardens in the sun — the stain shows up two winters later, after the crew has gone.
The house ends up wearing equipment
Rails and panels sit above the tile, so the roof reads as hardware rather than architecture — and the covering underneath still ages out of sight.
Heat you cannot see costs output
Cells lose efficiency as they warm, and air trapped under a rack has nowhere to escape. The vented tile body keeps the roof structure up to 5°C cooler, protecting yield and the deck below.
Codes moved on, racking did not
Fire class, uplift and rapid-shutdown rules now apply to the roof assembly, not just the module. A BIPV tile is the assembly: A1 body, interlocked uplift resistance, factory-optional RSD.
  • Cailin Xiho Solar Roof Tile

    Cailin Xiho Solar Roof Tile

    Cailin Xiho is a BIPV solar roof tile that replaces the roofing itself: glass-on-glass laminate, 1225 × 453 mm, 8.5 kg, 100 W per piece. Each tile carries 24 mono cells (182 × 91 mm, 2 × 12) behind 3.2 mm low-iron tempered glass, sealed in EVA and rated Class A for fire. Output is wired through an IP67 junction box with 900 mm of 4 mm² cable and MC4 connectors, so strings plug together on the roof. Because it is a roof first, Xiho goes straight onto battens with no racking and no extra penetrations, and it is quoted for more than 30 years of service from −40 to +85 °C.

  • Cailin Barl Solar Roof Tile

    Cailin Barl Solar Roof Tile

    Cailin Barl is a long-format BIPV solar roof tile: a 1750 × 430 mm glass laminate that covers the roof and generates 120 W. Each tile carries 32 mono cells (182.2 × 91.9 mm, 2 × 16) between 3.2 mm low-iron tempered glass on the face and 2 mm tempered glass behind, sealed in EVA and rated Class A for fire. Output leaves through an IP67 junction box with 900 mm of 4 mm² cable and MC4 connectors. A 1750 mm tile spans more of the slope per course than a shingle-format tile, so a roof needs fewer pieces and fewer joints to keep watertight.

  • Cailin Sol Solar Roof Tile

    Cailin Sol Solar Roof Tile

    Cailin Sol is a flat BIPV solar roof tile for modern roofs: 1190 × 390 × 23 mm, 6 kg, 80 W in black and 75 W in red. Each tile carries 26 mono cells of 166 × 83 mm (2 × 13) under 3.2 mm low-iron tempered glass, closed with a backplane instead of a second sheet of glass, and rated Class A for fire. The junction box is IP67 with 900 mm of 4 mm² cable and MC4 connectors. Its flat profile sits alongside slate and flat concrete tile, and it fixes through a standard modular hook, so the roofer who lays the tile is the one who lands the string.
  • Cailin Heliu Solar Roof Tile

    Cailin Heliu Solar Roof Tile

    Heliu is a stone coated solar roof tile — a BIPV roof tile, not a panel bolted on top. Each 1340 × 420 mm tile carries 24 monocrystalline cells behind 3.2 mm low-iron tempered glass, set in a granulated aluminium-zinc frame that matches the roofing. Lay it as Heliu-Shingle at 13 kg/m² or Heliu-Shake at 14 kg/m² and it interlocks with the stone coated courses on the roof. 80 W in black, 75 W in red, IP67 junction box and MC4 connectors, Class A fire rating, −40 to +85 °C, over 30 years. No racking, no penetrations: the roof stays a roof, and still works as a pitched roof solar array.
Product